You dont have the neutral conductor that you need for a receptacle outlet. The only way you could do this would be to change the 2-wire cable (from the light to the switch) out to a 3-wire cable.You dont have the neutral conductor

What if my outlet doesnt have a neutral wire?

The neutral wire allows the completion of the circuit and the switch to have power even when its turned to the off position when you want the lights off. Without this neutral wire in place, the circuit is broken any time the switch is now in the off position. It remains has power when the switch is in the On Mode.

Can an outlet work without a neutral wire?

If theres an open neutral, the outlets wont work, but they will still be energized. Use a plug-in circuit tester to check for an open hot or open neutral. An outlet or light switch with an open ground will still function, but because it lacks a safe path to earth, that device could give you a shock.

How do you add a neutral to an outlet?

7:5311:13Adding A Neutral Wire To A Light Switch - How To - YouTubeYouTubeStart of suggested clipEnd of suggested clipIts as simple as just pulling another wire down back through the conduit. And into the light switchMoreIts as simple as just pulling another wire down back through the conduit. And into the light switch.

What happens if you have no neutral?

If there is no neutral, there will be an influx of voltage entering your premise, resulting in over voltage and a possible life-threatening situation. Loss of neutral results in equipment being over heated, damaged and sometimes non-fixable. Replacing valuable electronic equipment can be very expensive.

Where do you connect the neutral wire?

Neutral: The white wire is called the neutral wire. It provides the return path for the current provided by the hot wire. The neutral wire is connected to an earth ground. Ground: The bare wire is called the ground wire.

Do I have to connect the neutral wire?

Except in very rare situations, all neutral wires in a box must be connected. The neutral is how the current flows back to the supply, so if you dont connect a neutral to one fitting it wont work. You could connect three in one connector, then three in another, and have a link between the two.

Can you connect a neutral wire to a hot wire?

You can have multiple separate loads between the hot and the neutral. Each of them is connected to the hot side and the neutral side. When no device is working (drawing power), no current flows. There is never a direct connection between the hot and the neutral wires.

Does the neutral wire carry current?

In a three-phase linear circuit with three identical resistive or reactive loads, the neutral carries no current. The neutral carries current if the loads on each phase are not identical. If the neutral is smaller than the phase conductors, it can be overloaded if a large unbalanced load occurs.

Can you connect the ground wire to the neutral wire?

No, the neutral and ground should never be wired together. This is wrong, and potentially dangerous. When you plug in something in the outlet, the neutral will be live, as it closes the circuit. If the ground is wired to the neutral, the ground of the applicance will also be live.

What happens if neutral touches ground?

If the neutral breaks, then plugged in devices will cause the neutral to approach the hot voltage. Given a ground to neutral connection, this will cause the chassis of your device to be at the hot voltage, which is very dangerous.

Can you connect a hot wire to a neutral wire?

You can have multiple separate loads between the hot and the neutral. Each of them is connected to the hot side and the neutral side. When no device is working (drawing power), no current flows. There is never a direct connection between the hot and the neutral wires.

Can I use ground wire as neutral?

a ground and a neutral are both wires. unless theyre tied together with other circuits, and not a home run back to the panel, there is no difference between the two where they both end up on the same bus bar in the box.

Where do you connect the white neutral wire?

4:325:51How To Identify Neutral Wire - YouTubeYouTube

What happens if I connect a hot wire to a neutral wire?

Tying together the hot and neutral wires creates a short circuit, which should immediately trip the circuit breaker.

What happens if I Connect the black wire to the white wire?

If you see both sides connected together, it means its a switch loop. The white wire thats connected to the black wire carries power to the switch. And the black wire thats in the same cable carries back that switched power to the outlet.

Can you get a shock from the neutral wire?

Under normal circumstances you would not get a shock from a neutral conductor. But if the neutral was broken at some point then you would get a shock. A neutral should be treated as a live conductor and properly isolated before touching.

Is it OK to use ground as neutral?

a ground and a neutral are both wires. unless theyre tied together with other circuits, and not a home run back to the panel, there is no difference between the two where they both end up on the same bus bar in the box.