Question: How much PSI is a FOX Float?

How much air should I put in my Fox Float shock?

Add air pressure to the main air chamber in ~50 psi (3.4 bar) increments, slowly cycling the shock after every 50 psi (3.4 bar) addition.

How much PSI does a Fox Float rp23 have?

Shock: Fox Float RP23Rider WeightAir PressureShock Sag100lbs (45.5kg)110 psi8-11 mm120lbs (54.4kg)130 psi8-11 mm140lbs (63.5kg)150 psi8-11 mm160lbs (72.6kg)170 psi8-11 mm4 more rows

How much PSI does a Fox Float X2 have?

Do not exceed 300 psi (17.2 bar), the maximum FLOAT X2 air pressure! Remove the pump. Sit still on the bike in your normal riding position, using a wall or a tree for support.

What PSI should rear shock be?

For the rear shock, start at about half of your rider weight for air pressure. You will have to adjust from here, but you will want to achieve the proper SAG for your frame, as recommended by your frame manufacturer. Typically this is somewhere between 30-40% of overall travel.

How much air should I put in my Fox forks?

Setting Fork Air Pressure Sag range should be set to 15–20% of total fork travel. Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the Schrader valve.

How do you adjust the Fox Float in RP23?

0:001:47Competitive Cyclist Guide to Fox RP23 Shock Set Up - YouTubeYouTube

What is Propedal on Fox shock?

Propedal is a marketing term created by FOX to describe a digressive compression damping force curve. Digressive force curves have been around long before bicycles had suspension. Digressive compression tunes use preloaded valving to build compression quickly in order to give a firmer feel at low shaft speeds.

How do you adjust a Fox Float X2?

Setting Shock Air PressureStart by setting the shock air pressure (psi) to match your body weight in pounds. Remove the pump.Sit still on the bike in your normal riding position, using a wall or a tree for support.Pull the sag indicator o-ring up against the rubber air sleeve seal.More items

How do you service a Fox Float X2?

0:2015:08DIALED: Episode #33 - FOX FLOAT X2 SERVICE - YouTubeYouTube

How much air should I put in my shocks?

The proper pressure of an air shock should be between 35 and 75 PSI. If it is any lower than this, the shocks will need to be filled with air.

How much air should be in Harley rear shocks?

Low profile rear suspension recommended air pressures: FLHX (STREET GLIDE)Shock LoadTotal WeightPressureRider with passenger weight ofup to 150 lbs (0-68 kg)20-30 psi (138-207 kPa)Rider with passenger weight ofover 150 lbs (over 68 kg)25-35 psi (172-241 kPa)Maximum GVWRSee Label40-50 psi (276-345 kPa)3 more rows•7 Jun 2014

How do you adjust Fox Float DPX2 performance?

Set Comp Adj to the OPEN setting, fully counter-clockwise. Open mode adjust is useful to control shock performance during rider weight shifts, G-outs, and slow inputs. Turn the 3mm hex clockwise to increase Low-Speed Compression damping and counter-clockwise to decrease Low-Speed Compression damping.

How do you set up Fox shocks?

2:022:57How To Set MTB Suspension Sag » ACADEMY | FOX - YouTubeYouTube

What is Fox Propedal?

Propedal is a marketing term created by FOX to describe a digressive compression damping force curve. Digressive force curves have been around long before bicycles had suspension. Digressive compression tunes use preloaded valving to build compression quickly in order to give a firmer feel at low shaft speeds.

How do you adjust a Fox rear shock?

Turn the 3-position lever to the OPEN mode. 2. Start by setting the shock air pressure (psi) to match your weight in pounds. With the air pump attached to the shock valve, slowly cycle your shock through 25% of its travel 10 times as you reach your desired pressure.

How do you service a Fox RP23 shock?

0:389:49Float RP23 Rebuild - YouTubeYouTube

How do you adjust the Fox RP23 shock?

0:001:47Competitive Cyclist Guide to Fox RP23 Shock Set Up - YouTubeYouTube

Write us

Find us at the office

Barbre- Cust street no. 100, 71585 Mogadishu, Somalia

Give us a ring

Camisha Lagua
+77 184 445 878
Mon - Fri, 9:00-19:00

Reach out